Cleaning And Maintenance; Cleaning The Lint Filter - Haier HLPW028BXW Instructions D'installation Et Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Disconnect power before cleaning.
Failure to do so can result in death or electrical shock.

CLEANING AND MAINTENANCE

IMPORTANT:
Before using cleaning products, always read and follow
manufacturer's instructions and warnings to avoid personal injury or product
damage.
1.
Unplug or disconnect power.
Use only a damp or sudsy cloth for cleaning the control panel.
If you spill liquid/powdered detergent, softener or bleach on the cabinet,
wipe the cabinet immediately to avoid damage to the finish.
Do not use abrasive cleansers, harsh chemicals, ammonia, chlorine bleach,
concentrated detergent, or solvents to clean the exterior of the washer.
These chemicals may damage or discolor the washer.
After washing clothes, leave the lid open so that moisture inside the
machine can evaporate and to prevent the growth of mold or mildew.
2.
Plug in or reconnect power.
CLEANING THE POWDERED DETERGENT DISPENSER
1.
Pull the dispenser drawer out to the stop and lift up slightly to remove.
2.
Rinse the dispenser with warm water and dry it thoroughly with a soft cloth.
3.
Insert the drawer at a slightly downward angle and push it back into place.
CLEANING THE BLEACH DISPENSER
To remove residue, wipe with a damp cloth and towel dry.
Do not attempt to remove the compartments or trims for cleaning.

CLEANING THE LINT FILTER

1.
Push down on the tab at the top of the filter to release the filter from the wash
basket.
WARNING
Electrical Shock Hazard
28

Publicité

Table des Matières
loading

Table des Matières