Video Length - Spypoint BF-8 Manuel D'utilisation

8 9
Turn OFF the camera. Press and hold the « UP » button, turn
the camera on. « 10_S » appears on the screen meaning the
1 minute delay has been replaced by a 10 second delay. To
reset the camera to 1 minute delay, follow the same procedure.
« 1_M » appears on the screen (see figure below).
10_5
10 sec. delay 1 min. delay
MULTI-SHOT
To take up to 4 consecutive shots at each detection, with a 10
second delay between each photo. This option is available in
« PHOTO » mode.

VIDEO LENGTH

Allows you to select the recording duration when the camera is
set in « VIDEO » mode.
DISTANCE
Turn the dial to the right to increase distance.
The « DISTANCE » dial (placed on the side of the camera) can
adjust the sensitivity of the detector.
The camera is equipped
with a detector sensitive to infrared. The system detects only heat
source in motion. The greater the mass of heat, more sensitive is the
Range of detector is between 5 and 50 feet.
system. The best way
« SET/ »
to adjust the distance is to set the camera in TEST mode
(see above). Make sure to have the least possible objects in front of
the camera during the positioning. This prevents picture taken by
the camera when oriented towards the sun while an object moves in
front of the camera (eg. a branch)