Publicité
Les langues disponibles
Les langues disponibles
Part Names and Functions
Rear panel
1
PRE OUT jacks
Note
• Audio signals output at the PRE OUT jacks are the same
channel signals that are output at the SPEAKERS L/R CH
terminals.
• The following parameter settings are effective for audio
signals output at the PRE OUT jacks.
- BASS
- TREBLE
- BALANCE
- VOLUME
2
AUTO POWER STANDBY switch
ON: The unit enters standby mode automatically if it
is left turned on and not operated for eight hours
(Auto Power Standby function).
OFF: The unit does not enter standby mode
automatically.
3
TRIGGER IN jack
Connect external components that support the trigger
function. (➔ page 20)
10
6
7
8
9
0
A
B
4
REMOTE IN/OUT jacks
Connect external components that support the remote
function. (➔ pages 20 and 21)
5
SERVICE jack
This jack is used to test the product.
6
SPEAKERS L/R CH terminals
7
TUNER input jacks
8
PHONO input jacks
9
CD input jacks
0
MM/MC switch
Set this switch to the MM or MC position according to
the type of magnetic cartridge installed in the turntable
that is connected to the PHONO input jacks.
Note
Before you replace the cartridge for the turntable, be sure
to turn off the power to this unit.
1
C
D
Publicité
