Publicité
Les langues disponibles
Les langues disponibles
Materials needed:
C. Carefully unfold the 14" metal straps, these could have sharp edges. Place a #10 3/8" Philips screw through the bottom
¼" diameter (large) strap hole. Position a metal strap against the side of aluminum frame over the predrilled hole as shown in
Figure 4
Figure 5
Figure 7
and
. DO NOT let the metal straps extend below the aluminum frame. See
. Hold the metal strap
securely to prevent rotation of the strap while screwing it to the aluminum frame.
D. Repeat installation of second strap on the opposite side.
Figure 5
E. Position both straps vertically as shown in
. Fold both straps inward over the climbing section and out of the way.
Figure 6
See
.
F
6:
F
4 :
IGURE
STRAP POSITION
IGURE
STRAP INSTALLATION
F
5:
IGURE
STRAP POSITION
F
7
IGURE
6
Publicité
