Publicité
Les langues disponibles
Les langues disponibles
NOTE: Only when you are NOT able to install the lag screws at posi ons 2 through the pivot plates due to obstruc ons,
should you follow the next instruc ons for the alterna ve posi on 2*.
If using the alterna ve posi on: Posi on shims from above and below at the alterna ve posi ons 2*. Then, drill 5/32"
diameter x 3" deep pilot holes through the bushings, shims and into the ceiling joists. Finally, install the two lag screws
and two washers to secure the a c ladder.
Materials needed:
F
24 : SHIMMING SIDE FRAME
IGURE
F
25 : SECURING SIDE FRAME RAILS
IGURE
14
Publicité
