Johnson 40-6515 Manuel D'instructions page 8

3515H-All_Manuals 6/2/10 10:16 AM Page 8
2. Turn the vertical adjustment knob to center the bubble in the
vertical vial.
7. Using the Product
Keypad
Rotating speed
switch key
Low speed LED
Middle speed LED
High speed LED
When the laser is in the horizontal position, the laser will not
power on until the compensator/transportation lock knob is
turned to the "On" position.
Power Key: Press this key to power on/off the laser.
Power LED: Lighted LED mean power-on
Extinguished LED means power-off
Flashing LED means weak battery voltage
8
Power Key
Power LED
©2010 Johnson Level & Tool - Rev. 1