Johnson 40-6515 Manuel D'instructions page 10

3515H-All_Manuals 6/2/10 10:16 AM Page 10
Application Methods
Install the alkaline batteries into the instrument. Put the laser on a
platform or connect the laser to a tripod using the 5/8" - 11 screw
thread.
Connect the laser with the tripod using the 5/8" - 11 screw thread
Note:
1. To use the laser in the self-leveling status, please set the lock knob
to the on position.
2. While the laser is in the vertical status (manual mode), please set
the lock knob to off position.
3. Power on the laser and select your desired speed by pressing the
keys on the keypad.
4. After operations or before moving the unit, please power off and
lock the laser first.
10
Use on a platform
©2010 Johnson Level & Tool - Rev. 1