Grundig GHPH-MM08 Manuel D'utilisation page 34

8 Typical applications
The application examples given below are for illustration only.
8.1 Application 1
Outdoor
Code Assembly unit
1 Main unit
2 User interface
3 SV1:3-way valve (Field supply)
4 Balance tank (Field supply)
4.1 Automatic air purge valve
4.2 Drainage valve
TE1: Balance tank upper temperature
4.3
sensor (optional reserved)
P_o: Outside circulation pump (Field
5
supply)
6 P_s: Solar pump (Field supply)
Tsolar: Solar temperature sensor
6.1
(optional)
34 / 276 EN
Modbus
Indoor
Code Assembly unit
11 Domestic hot water tank (Field supply)
WTH: Domestic hot water tank booster
11.1
heater (Field supply)
11.2 Coil 1, heat exchanger for heat pump
11.3 Coil 2, heat exchanger for Solar energy
12 Filter (Accessory)
13 Check valve (Field supply)
14 Shut-off valve (Field supply)
15 Filling valve (Field supply)
16 Drainage valve (Field supply)
17 Tap water inlet pipe (Field supply))
Heat Pump Monobloc Inverter / User Manual