Grundig GHPH-MM08 Manuel D'utilisation page 106

13 Trouble shooting
13.3 Parameter view
This menu is for installer or service engineer reviewing the operation parameters.
At home page, go to '' '' > ''PARAMETER VIEW''.
Press "OK". There are twelve pages for the operating parameter as following. Use "►", "◄", ''▼", ''▲''
to scroll.
Press "►" and "◄" to check slave units' operation parameter in cascade system. The address code
in the upper right corner
106 / 276 EN
Heat Pump Monobloc Inverter / User Manual