Télécharger Imprimer la page

Beko GNE V420 WB Notice D'utilisation page 14

Publicité

Les langues disponibles

Les langues disponibles

Installing Water Filter
(in some models)
Installation Requirements
Two different water sources may be
connected to the refrigerator for water
supply: the mains cold water supply
and water in a jug.
A pump should be used for jug water
usage.
Check that the parts stated below are
supplied with your appliance.
1. Union for connection of the water
pipe to the rear of the appliance
2. 3 pieces of pipe clips (In case
required to secure the water pipe)
C
Note: Since the following parts are
not required in use with a jug, they
may not be found in the product you
purchased.
3. 5 meter long water pipe (1/4 inch in
diameter)
4. Cold mains water valve with mesh
filter (Tap Adapter)
5. Water Filter to be fitted to the bracket
inside the fridge compartment.
Water connection to the
refrigerator
Please follow the instructions
below.
2
3
1
13
EN
4
5
6

Publicité

loading

Ce manuel est également adapté pour:

Gne v420 pxGne v421 xGne v421 b