Publicité
Les langues disponibles
Les langues disponibles
• Brush saw guard and brush saw blade.
4.2.1
INSTALL THE TRIMMER GUARD AND THE
TRIMMER HEAD
4.2.1.1 INSTALL THE TRIMMER GUARD
WARNING
• THE STRING CUT-OFF BLADE MUST ALWAYS
BE EQUIPPED ON THE TRIMMER GUARD
BEFORE OPERATING THE PRODUCT.
• DO NOT TOUCH THE STRING CUT-OFF
BLADE.
1.
Place the trimmer guard onto the mounting posts.
2.
Securely tighten the screws with the torx wrench.
4.2.1.2 REMOVE THE TRIMMER GUARD
1.
Remove the screws from the trimmer guard with
the torx wrench.
2.
Remove the trimmer guard.
4.2.1.3 INSTALL THE TRIMMER HEAD
1.
Insert the metal rod (1) into the specified angle
transmission hole (2), and hold in place. Turn the
center shaft (3) until the metal rod blocks rotation
of the shaft.
English
3
2
2.
Place the trimmer head onto the shaft.
3.
Turn the trimmer head counterclockwise to
securely tighten it.
4.
Remove the metal rod.
4.2.1.4 REMOVE THE TRIMMER HEAD
1.
Insert the metal rod (1) into the specified angle
transmission hole (2), and hold in place.
9
1
EN
Publicité
