Télécharger Imprimer la page

SOUNDMASTER SCD1700SW Mode D'emploi page 16

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
1. Press repeatedly the "STANDBY / SOURCE" button, until "CD" is shown in the display.
2. Open the CD compartment by pulling the CD door upwards by the tab.
3. Insert an audio CD with the printed side facing upwards on to the central cone so that the
CD clicks into place and then close the lid of the CD compartment.
4. The CD will start the playback from the first title.
5. In order to remove a CD, please press the "STOP / ENTER" button, open the CD door and
lift the CD out carefully.
Keep always the CD deck closed.
NOTE: If a disc is inserted with a wrong side face up, respectively if no disc is inserted, then the
message "NO DISC" appears in the display.
Control buttons:
➢ To start or interrupt the playback, press the "PLAY / PAUSE / SCAN" button.
➢ To stop the playback, press the "STOP / ENTER" button.
➢ With "SKIP+ / TUNE+" button you can jump to the next track.
If the button is kept pressed down, the machine starts to search forwards through the tracks.
The "SKIP- / TUNE-" button can be used as follows:
Press once = This starts the current track again from the beginning.
Press twice = This jumps back to the previous track.
If the button is kept pressed down, the machine starts to search backwards through the
tracks.
➢ To select a folder, press the "FOLDER" button (only for MP3-CD or USB).
Audiobook function (Resume)
If you change the mode or turn off the unit and come back to the CD mode, the unit starts the
playback from the last point.
Press the "STOP / ENTER" button and start the playback again, the unit starts with the first
track (track 1).
ID3 function
During playing a MP3-CD or USB, press the "MENU / INFO" button to activate the ID3 function.
Further information (Title, artist, album) are shown in the display (If available and stored).
Press "MENU / INFO" again to deactivate the function.
Repeat and playback functions
The following repeat and playback functions can be selected during playback by repeatedly
pressing the "MODE / PROG" button:
➢ Track repeat – The display shows "REP-1".
➢ Folder repeat – The display shows "REP-DIR". (only for USB and CD-MP3 playback)
➢ CD repeat – The Display shows "REP-ALL".
➢ Playing in random order – The display shows "RANDOM".
SCD1700 / English Instruction Manual
CD
5

Publicité

loading

Ce manuel est également adapté pour:

Scd1700