Publicité
Les langues disponibles
Les langues disponibles
GearLoft™ Shelf Use
Requirements
Intended to be installed on Gladiator
■
panels or GearTrack
channels.
®
Maximum weight limit is 100 lbs (45.5 kg).
■
Unpack the GearLoft™ Shelf Parts
Remove the shelf parts and fasteners, and dispose of/recycle all
packaging materials.
Assemble GearLoft™ Shelf
F1
F1. 5/16" Allen-head bolt (4)
F2. 5/16" Flange nut (4)
Gather the required tools before starting assembly.
Tools Needed:
1/2" Wrench
■
Parts Supplied:
Allen wrench
■
IMPORTANT: Determine whether you will be mounting the shelf
to the wall with the braces above or below the shelf.
2
INSTALLATION INSTRUCTIONS
Garageworks GearWall
®
F2
F11
F11. Wing nut (4)
Mounting Braces Above Shelf
1. With the braces pointing upward, align the braces with the
center and back holes on each side of the shelf.
®
2. Using Allen-head bolts (F1) and flange nuts (F2), attach a
brace to each side of the shelf. Fully tighten the bolts.
A
A. Brace attached to shelf
Mounting Braces Below Shelf
1. With the braces pointing downward, align the braces with the
center and back holes on each side of the shelf.
2. Using Allen-head bolts (F1) and flange nuts (F2), attach a
brace to each side of the shelf. Fully tighten the bolts.
A. Brace attached to shelf
A
Publicité
