Torin BIG RED T80501 Manuel Du Propriétaire page 12

TO REPLACE JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Remove the cover plate.
3. Open release valve by turning handle counter-
clockwise.
4. Remove the oil fill plug.
5. Turn the jack on its side to drain old oil from the
oil fill hole.
6. Position the jack on level ground and keep saddle
in the lowered position. Fill the oil case until oil
level is just beneath the lower rim. Keep dirt and
other foreign materials clear when pouring.
7. Replace oil plug.
8. Replace the cover plate and perform Air Purge
Procedure.
12