Publicité
Les langues disponibles
Les langues disponibles
13. Place the door on the
bottom hinge, making sure
that the hinge pin is inserted in
the hole at the bottom of the
d o o r .
I n s t a l l
h i n g e ( s u p p l i e d w i t h t h e
a ppl i ance) and fix it w ith
screws.
14. Open the cover on door
left(7) and take out the wire.
C o n n e c t t h e e l e c t r i c a l
connector.
15. Install the light switch(1) to
left hinge cover(supplied with
the appliance) and connect the
wire.
16. Fix the left hinge cover and
the hole cover with screws.
Installing the handles
This appliance has been built with external handle, which
is in poly bag. Please follow instruction below to install
them :
1. Remove two screws(8) by a cross screwdriver.
2. Take out the handles(9) and fix it with the two
screws(8).
3. Cover the two screws(8) with two caps(10). The caps
are in a small poly bag together with the handles.
Figure 1 : Front view without handles
Figure 2 : Exploded view of installing the handles
Figure 3 : Front view with handles
t h e
l e f t
-57-
7
1
Publicité
