Eureka NEC280 Serie Guide Du Propriétaire page 9

How to maintain your vacuum cleaner
CAUTION
!
Never operate vacuum
cleaner without all filters,
filter screen and dust cup
in proper position.
WARNING: Moving parts!
Recharge cleaner after
each use.
Washable dust cup filter - clean monthly
1. Press
2. Pull out
Click the dust cup release button,
1.
l ocated on the front of the handle
just above the dust cup and pull
dust cup out.
Lift out dust cup filter and shake
2.
off dust frequently.
Every three months rinse filter
and dry THOROUGHLY.
To avoid unnecessary service calls, periodically check brushroll for debris. lf brushroll gets clogged
it will automatically shut o . Turn vacuum o and unplug before attempting to remove clog.
plugged into a power source.
WARNING: Do not attempt to remove belt.
Call the eureka customer service HELPLINE
at 1-888-365-2230.
If debris cannot be removed easily, locate the brushroll release
tab on the right side and open the brushroll cover. Remove the
brushroll and clear any tangled hair and remaining debris.
2. Pull out
Click the dust cup release button, located
on the front of the handle just above the
dust cup and pull dust cup out.
3. Reattach filter and Cyclone.
4. Click dust cup back into place
on unit.
How to maintain brushroll
Washable brushroll – clean frequently
CAUTION
Dust cup – Empty after each use
1. Press
Washable post-motor filter - clean every 6 months
24h
1. Twist filter cover and remove.
2. Lift out post-motor filter.
3. Shake to remove dust.
4. Every 6 months, replace filter or rinse and dry THOROUGHLY.
5. Reposition filter and cover and twist to 'lock.'
Step on floor nozzle to lower handle. Turn vacuum face down
on floor. Use scissors to clip heavy threads or strings.
To reassemble:
1. Align one end of brushroll with floor nozzle gear.
2. Press other end into slot.
3. Replace brushroll release tab into slot and press down
to click it into place.
3. Press
Press lever to release bottom lid of dust cup
to empty debris.
www.eureka.com/ca
24h
Click!
9