Eureka NEC280 Serie Guide Du Propriétaire page 11

!
Make sure vacuum cleaner is o and charging plug is unplugged.
This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor
overheating. If the vacuum suddenly shuts o , proceed as follows: 1) Check the vacuum for a
possible source of overheating such as a full dust cup, blocked wand or clogged filters. If these
conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum.
2) After the 30 minute period, press the power button. lf the vacuum still does not work, call the
Eureka Customer Service HELPLINE at 1-888-365-2230.
Problem
Motor will not start
Charging indicator lights
are not lit while charging
Not enough
suction power
Not enough
suction power
Brushroll will not turn
Discarding the vacuum and battery pack
!
Before you discard this vacuum, dispose of battery in an environmentally safe
manner. Do not discard battery with your regular household trash.
Important battery disposal information.
To find a disposal location nearest you, call 1-888-365-2230.
To preserve natural resources, please recycle or dispose of expired battery
pack properly. This product contains a lithium-ion battery. It must be disposed of
properly. Local laws may prohibit disposal of lithium-ion batteries in ordinary
trash. Consult your local waste authority for information regarding available
Li-ion
recycling and/or disposal options.
Model
Rated Voltage
Rating Power
Battery Capacity
Adapter Model
Adapter Rated Input
Adapter Rated Output
Problem solving
N0TICE: Thermal cut-off
Solution
• Make sure cleaner is fully powered.
• Push charger securely into electrical outlet, try another
outlet or check circuit breaker.
•
• Make sure charger is securely inserted into electrical outlet.
• Make sure charging plug is securely inserted into handle.
• Indicator lights stop blinking when fully charged.
• Empty dust cup and clean or change filters. See page 9 for
maintenance instructions.
• Make sure cleaner is fully powered. Charge battery.
• Remove clogs that restrict the airflow.
• Make sure cleaner is fully powered.
• Charge battery for up to six hours before using.
• Check brushroll for debris. See page 9 for maintenance instructions.
NEC280 Series
25.2V
250W
2000mAh
MC2805A
100V-240V~ 50/60Hz 0.5A
25-29V 500mA
www.eureka.com/ca
1 1