Polar GL178 Mode D'emploi page 5

Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning
• Clean the interior of the appliance as often as possible
• Do not use abrasive cleaning agents. These can leave harmful residues
• Always wipe dry after
Condensation and ice will form with frequent and prolonged opening of the doors.
Operating outside of the recommend temperature range and placing next to a heat source
will also increase the amount of ice and internal/external condensation. If external
condensation occurs wipe the surface down with a cloth.
Excessive ice will result in longer running times that will increase energy consumption and
increase the deterioration of components.
Cleaning the Condenser
Periodic cleaning of the Condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is not
working
The appliance is not
cooling
Error code EE4
GL178_ML_A5_v6_20230927.indb 5 GL178_ML_A5_v6_20230927.indb 5
cleaning.
Probable Cause
The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Coolant Leak
Fan Motor Failed
Airflow to the condenser
obstructed
Condenser is clogged
• Restricted Airflow
• Blocked Condenser
Solution
Check unit plugged in correctly and
switched on
Replace Plug or lead
Replace the fuse
Check mains power supply
Consult a qualified Technician
Consult a qualified Technician
Increase the gap between appliance and
obstacles/heat source
Consult a qualified Technician
• Increase airflow
• Consult a qualified Technician
EN
5
2023/9/27 16:55 2023/9/27 16:55