Publicité
Les langues disponibles
Les langues disponibles
Basic functions
1.
Connect the temperature sensor to port T1/T2 on the top of the device. Only one direction is possible.
Please note the polarity labelling on the temperature sensors' plug and on the side of the port.
You can also connect a temperature sensor of type J to the thermometer; these are optionally
available.
As the sensor sockets are arranged tightly together, if all four connections are in operation and
sensors other than those included with delivery are used, some of the plugs may not be able
to connect properly.
2.
Press the on/off button (8) to switch the device on.
3.
The instrument will undergo a quick self test. It will show the amount of memory available.
If the memory is full, you will see the word "FULL" on the display. Follow the instructions in the
sub-chapter "Adjusting settings" to clear the memory.
4.
Wait until the display becomes stable.
5.
Place the sensor at the locations which you want to measure.
6.
The display will show the temperature reading of the T1 / T2 sensor respectively. If no temperature
sensor is connected, four horizontal bars will be displayed instead of a temperature reading.
7.
Press the UNIT button to switch between Celsius (C), Fahrenheit (F) and Kelvin (K).
8.
Press the HOLD ▼ button (7) to hold the reading on the display. HOLD will appear on the top part of the
display. Press the HOLD ▼ button (7) again to return to the display of real-time temperature readings.
9.
Press the SET button (10) to activate/deactivate the backlight.
10.
Press the on/off button (8) to switch the device off. If no button is pressed for 20 minutes, the
device will automatically power off.
The section "Adjusting settings" describes how to deactivate the auto-off function.
Special functions
▲T1·T2 T3·T4 button (2)
Throughout the operation, press and hold the button ▲T1·T2 T3·T4 (2) to switch between the
measuring sets T1 / T2 and T3 / T4.
Press once:
Press twice:
Press three times:
Press four times:
24
•
The positions of the real-time readings of T1 / T3 and T2 / T4 switch.
•
The difference between the readings (T1 - T2) / (T3 – T4) appears on top.
•
The read-time reading of T1 / T3 appears underneath.
•
The difference between the readings (T1 - T2) / (T3 – T4) appears on top.
•
The read-time reading of T2 / T4 appears underneath.
•
Return to normal display mode.
Publicité
