Publicité
Les langues disponibles
Les langues disponibles
assembly
(continued)
fitting the telescopic pipe
NB: During recirculation, the ventilation slits must not be
covered by the lower telescopic pipe.
Slide the flanged end of the upper telescopic pipe upwards
between the fixing bracket and the wall, and slide the
telescopic pipe against the ceiling. The telescopic pipe locks
into position.
Hook the lower telescopic pipe onto the upper part and
allow the lower part to drop so that it slides into the edge of
the hood.
Put the filters in place and test the extractor hood.
GB 16
technical data
type number:
power supply:
connected load:
dimensions (h x w x d): see "fitting dimensions"
This appliance complies with the CE directives.
disposal of packaging and appliances
The packaging of the appliance is recyclable. It can be made
up of:
– cardboard
– polyethylene
– CFC free polystyrene (PS rigid foam)
– polypropylene straps around the box
Please dispose of these materials in a responsible way in
accordance with the regulations of your local authority.
Your local authority will also be able to give you information
about disposing disused household appliances in a
responsible way.
see data plate in the hood
230 V - 50 Hz
see data plate
GB 17
Publicité
