Dogtra CUE GEN2 Manuel Du Propriétaire page 8

3. PRIMARY FUNCTION BUTTON SET UP
Three stimulation modes available for the primary function
button: NICK, CONTINUOUS, PAGER
To select a mode, use the 'NCP Mode Select' button located
on the back of the transmitter. Verify your current mode on
the top line of the LCD screen.
NICK
Provides one short stimulation burst when tapped.
Holding the button does not apply additional stimulation.
CONTINUOUS
Provides continuous stimulation while pressed. As a
safety feature, stimulation will stop if held more than 12
seconds.
PAGER
Provides a non static vibration correction. As a safety
feature, vibration will stop if held more than 12 seconds.
12
Stimulation
type indicator
Use Stimulation Level Buttons to select the output level.
Level up
button
Level
down
button
The primary button will apply the selected stimulation level,
which will be the base level for BOOSTED CONTINUOUS
Finding the Right Stimulation
Start with the lowest stimulation level initially to gauge your
dog's reaction.
Observe subtle responses such as the dog looking around
or shaking its head as a appropriate starting level.
Press and hold the button
for more than 2 seconds to
increase/decrease levels
quickly.
13