Publicité
Les langues disponibles
Les langues disponibles
8. Handheld Transmitter LCD
The LCD screen indicates the stimulation level on the
screen ranging from (0-127). The battery life indicator
shows:
3 bars = full charge
2 bars = medium charge
1 bar = needs charge
The battery life indicator only shows the remaining charge
of your transmitter. To find the remaining charge for your
receiver, observe the LED indicator light on the receiver.
Care for LCD Transmitters in Cold Temperature
In cold temperatures (10°F or below), the Liquid Crystal
Display (LCD) on your transmitter may be dim or slow to
respond. Wait until the display becomes visible before
selecting any training level. Even though the LCD screen
might be dim or slow to respond when you push the
Nick or Constant button, the transmitter will still function
properly. In the occurrence of extremely cold weather, the
LCD screen might take a moment to respond causing the
intensity level to freeze at that current level. If you turn
the Rheostat Dial, the level on the screen may not change
but the actual intensity from the receiver will change in
agreement with the dial. In this situation, it is ideal to
20
either wait until your transmitter is back in working order
before emitting a correction or while holding the Constant
button down, slowly turn the Rheostat Dial while watching
your dog's reaction. Do not turn the Rheostat Dial rapidly,
because the receiver will emit a static correction based on
the level of the Rheostat Dial, which might not be correctly
reflected on the LCD screen.
9. Attaching the Belt Clip
Follow the instructions below to attach the included belt
clip to the transmitter.
1. Align the belt clip to the grooves on the back of the
transmitter.
2. With a firm grip, screw on the belt clip's Phillips head
screws with a screwdriver.
Caution! Tighten until firmly in place. Be careful not to
over tighten.
21
Publicité
