Peg-Perego book pop-up Notice D'emploi page 21

seat (fig_f).
ACCESSORY
2 7 VARIO: Stylish foot muff is adjustable to 3
different lenght.
MOSQUITO NETTING: can be fastened to the
hood (fig_b).
RAIN CANOPY: can be applied to the hood
SERIAL NUMBERS
2 8 Seat Pop-Up reports information as at the
date of manufacture of the product.
_ Product name, date of manufacture and serial
number of the seat.
This information is required for any
complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may
give rise to colour changes of various different
materials; store this product in a dry place.
CLEANING THE RAIN CANOPY: wash with
a sponge and soapy water; do not use
detergents.
CLEANING FABRIC PARTS: brush fabric parts
to remove dust and wash by hand at a
maximum temperature of 30°C; do not wring;
do not use chlorine bleach, do not iron; do
not dry clean; do not apply solvent-based
stain removers and do not dry in a tumble
dryer.
______________________________________________
BASSINET POP-UP
INSTRUCTIONS FOR USE
2 9 OPENING THE BASSINET Pop-Up: Turn the
handle of the Bassinet Pop-Up upwards;
3 0 unhook the two Velcro straps on both sides as
shown (Fig. a, arrows a) and lift the Bassinet
Pop-Up upwards with the handle (Arrow b);
3 1 To open and lock the base in the open
position, move the sliders from the centre of
the base towards the two extremities (Fig. c)
until they click into place (Fig. d);
3 2 close the Velcro straps on both sides of the
Bassinet Pop-Up.
3 3 HOOD: the hood comes with 6 side buttons
(Fig. a); moreover, on opening the zip, a mesh
insert allows the parent to monitor the baby
(Fig. b).
It is possible to extract a portion of fabric
from the hood in order to protect the child
against the sun (fig_c); this can then be easily
repositioned in the hood when it is no longer
required.
3 4 COVER: place the cover over the Bassinet Pop-
Up; fasten the buttons on both sides and the
elastics as shown in the figure.
The cover has different characteristics
(Fig. c).
depending on the collection.
The rubber bands that fasten to the hood
allow the cover to provide greater protection
to the child against the elements.
3 5 HANDLE: the handle is only locked in the
vertical position (Fig. a).
To lower the handle, press the two side
buttons simultaneously and push it
downwards (Fig. b).
The handle is useful to carry the Bassinet Pop-
Up and fasten it onto the chassis (Fig. c).
3 6• SLEEPING POSITION: To turn the Navetta
PopUp into a non-rocking cradle, extract
the 4 feet positioned under the base.
3 7 ADJUSTING THE BACKREST: thanks to the
special COMFORT SYSTEM, you can adjust the
backrest into 3 positions.
Just pull the strap towards you, as shown, and
position it as you please.
3 8 CLOSING THE BASSINET Pop-Up: The Bassinet
Pop-Up can be closed to reduce its bulk. Press
and push the tabs of the sliders beneath the
base of the Bassinet Pop-Up (Fig. a) and move
them simultaneously towards the center of
the base (Fig. b).
3 9 Rotate the handle downwards, pressing the
two side buttons simultaneously (Fig. c).
Fasten the Velcro straps on both sides, to
keep the Bassinet Pop-Up closed (Fig. d).
GANCIOMATIC SYSTEM
4 0 The Ganciomatic System is a fast and practical
system that allows you to fasten the Bassinet
Pop-Up to the Ganciomatic attachments of
the stroller or chassis.
To fasten the Bassinet Pop-Up, position it on
the chassis and press down with both hands
until it clicks.
Always enable the brake on the chassis before
fastening and unfastening the bassinet.
Ensure the Bassinet Pop-Up is properly
fastened.
_ To release it, pull the lever on the
Ganciomatic handle (arrow_a) and lift the
Bassinet Pop-Up.
REMOVING THE PADDING
4 1 To remove the padding of the Bassinet Pop-Up:
_ Remove che mattress
_ Unbutton the cover and remove it
_ Inside the Bassinet Pop-Up, unbutton the two
buttons attached to the handle (Fig. a) and
open the two zips as shown in figures b and
- 21 -