Publicité
Les langues disponibles
Les langues disponibles
Information codes
The information
1
codes below
appear on the
display panel
SR2AJ90✴✴U Series
Information codes
If a code appears,
2
turn off the
emergency
switch and check
the instructions
below and take
appropriate action
The POWERbot is caught, stuck, trapped or lifted while
moving around.
Turn off the emergency switch and move the POWERbot to another
area.
Foreign matter caught in the Power brush.
Turn off the emergency switch and remove the foreign matter from the
Power brush.
Foreign matter caught in the left Driving wheel.
Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Foreign matter caught in the right Driving wheel.
Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Bumper sensor needs to be checked.
Turn off the emergency switch and turn it back on.
Contact a service center if information code does not disappear.
Foreign matter accumulated on the obstacle sensor.
Turn off the emergency switch and clean the front and rear sensor
with a soft cloth.
ENGLISH-34
The information
3
code will disappear
when you turn on
the emergency
switch
Checklist
Publicité
