Samsung POWERbot VR2AJ9020UG Guide D'utilisation page 21

Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
Cleaning the dustbin
Remove the dustbin
1
Detach the cyclone unit
4
from the dustbin cover,
and then wash the
dustbin and the filter
Cleaning the sensors and the camera
Lightly wipe with soft cloth. Do not use water or cleaning solutions.
Remove the dustbin
2
cover
Reassemble the
5
dustbin
Camera
Front sensor
window
ENGLISH-21
Remove dust in the
3
dustbin and cyclone
unit
Reinsert the dustbin
6
into the main body until
it clicks
Rear sensor
Cliff sensors
"Click"
window