Publicité
Les langues disponibles
Les langues disponibles
If "UP" is displayed on the display panel while the POWERbot is charging, it means that the update
is in progress. Please wait for completing the rebooting.
If the product registration is not done, please follow the following instructions:
– Refer to the popup message and retry the registraion procedure.
– Check if the UPnP option of the wireless router is available and retry the registration procedure.
– Check if the operating mode of the wireless router is a router mode and retry the registration procedure.
– If you have more than two POWERbot, turn off the others to register the one. The connection must be one
to one.
Samsung Smart Home Service does not guarantee a normal operation under firewall environment.
If the POWERbot and smart phone are not connected to the same wireless router, response delay
may occur according to network environment.
Smart control and Wi-Fi indicator
–
On : Smart control is locked.
–
Off : Smart control is allowed.
–
Off : The POWERbot is connecting to the wireless router.
–
On : The POWERbot is connected to the wireless router.
If Smart control is locked, you cannot use Samsung Smart Home App.
Using the Samsung Smart Home app
Creating your Samsung account
If you want to use the Samsung Smart Home app, please register your
Samsung account in Samsung account app.
Note
If you do not set auto-login to the Samsung Smart Home app and run
the app, the screen of Samsung account appears one time at first.
If you are a user of a Samsung smart phone, register your Samsung
account in the settings of the smart phone, and then the automatic
login gets set without any other login processes, and you can use the
Samsung smart home app immediately.
ENGLISH-25
Publicité
