Publicité
Les langues disponibles
Les langues disponibles
Condensation may form on the anti-slip mat depending on
the type and quantity of food stored. Where necessary,
remove the anti-slip mat and wipe away the condensation
with a dry cloth.
Ethylene absorber
For important safety instructions and information about
installation and use, see the enclosed installation
instructions for the ethylene absorber.
The ethylene absorber slows down the ripening of
ethylene-sensitive fruit and vegetables to keep them
fresher for longer. Installing and resetting the ethylene
absorber → Page 19
Ice scoop
You can use the ice scoop to remove a portion of ice
cubes.
Tip
Place the ice scoop in the variable-temperature container.
Before using the appliance for the first time en-us
7 Before using the appliance for the
Before using the appliance for the first time
first time
Before using the appliance for the first time
7.1 Performing initial start-up
Requirements
The appliance is installed in accordance with the
¡
enclosed installation instructions.
The appliance is connected to the electricity supply.
¡
→ Page 8
Switch on the appliance at the main switch.
1.
→ "Appliance", Fig.
1
Select a language.
2.
Check the water connection and the water output.
3.
Select one of the options:
4.
To set up Home Connect®, touch "Connect Now"
‒
and follow the instructions on the display.
To set the time, date and temperature unit manually,
‒
touch "Manual Set-Up" and follow the instructions on
the display.
Select one of the options:
5.
To set up the ethylene absorber, touch "Install Now"
‒
and follow the instructions on the display.
To directly access the start screen, touch "Skip".
‒
The initial start-up is complete.
a
8 Basic Operation
Basic Operation
Basic Operation
8.1 Switching on the appliance
Switch on the appliance at the main switch.
1.
→ "Appliance", Fig.
1
The appliance begins to cool.
a
Set the required temperature. → Page 14
2.
8.2 Operating tips
Once you have switched on the appliance, the set
¡
temperature is only reached after several hours.
Do not put any food in the appliance until the set
temperature has been reached.
The front and side panels of the housing heat up
¡
occasionally. This prevents condensation from forming.
When you close the door, a vacuum may be created.
¡
The door is then difficult to open again. Wait a moment
until the vacuum is offset.
The temperature in the appliance varies due to the
¡
following conditions:
– How often the appliance is opened
– Load capacity
– Temperature of newly stored food
– Ambient temperature
– Direct sunlight
, Page 9
/
1
, Page 9
/
1
13
Publicité
