Black Diamond RECON LT Manuel D'instructions page 14

•
Motion-controlled initialization
•
Short switching timeout
•
Long warning phase with alert and countdown prior to switching
•
Continued alert, also after switching
4.7.2 Operation
With auto revert enabled, while in SEARCH mode and after the predetermined time without motion, the
transceiver will begin the auto revert process. As shown below, a countdown with an associated sound will begin.
If at any time during the countdown the mark button is pressed, the clock will be reset and the transceiver will
remain in SEARCH. If a signal is encountered during the countdown, the timer will also be reset and the
transceiver will remain in search.
Beacon
SEARCH
function
Display
Search display
indication
Sound Search sound
Manual abort
Setting 1 (60 s)
Setting 2 (90 s)
Setting 3 (120 s)
4.8 SEARCH MODE | SEARCH STRATEGY
4.8.1 In case of emergency
A buried person has the greatest chance of being rescued by an efficient companion rescue. In the event of an
accident, the following applies: KEEP CALM, OBSERVE, ALERT, ACT WITH COORDINATION!
(1) Keep calm & get an overview
•
Are there any other risks?
•
How many victims?
•
Determine the primary search area!
(2) Make a brief emergency call
•
EU 112, AT 140, CH 1414, IT 118, FR 15, NA 911
Manual BLACK DIAMOND RECON LT
Turn device or press MARK button
START WARNING
0:30 min
1:00 min
1:30 min
WARNING
SWITCHING TO SEND
1:00 min
1:30 min
2:00 min
SEND
Turn device off or into SEND mode
6 / 22