Black Diamond RECON LT Manuel D'instructions page 12

Firmware version
Battery capacity/type
(AL=Alkaline,
LI=Lithium)
4.4 GROUP CHECK FEATURE
The Black Diamond Recon LT provides the option for a group check. This does not replace the standard mode
check, but is a useful feature with larger groups. In group check mode the receiving range is limited to 1 m.
Group check regular
BLACK DIAMOND RECON LT
Check: frequency
Press and hold the MARK button (1D) during the
Start
group check countdown (3-2-1)
•
"Distance indication" = OK
•
Result
"ER" = error (frequency not according to
standard)
End
The Regular group check is sufficient for checking modern, digital devices with 3 antennas.
Regular group check display readings
Device not transmitting
or distance too large (> 1
m)
Continuous wave indication | old-device-indication (see chapter 4.8.6)
Manual BLACK DIAMOND RECON LT
Self-check OK Group check
countdown
Release button
Distance reading: device
transmitting and
frequency according to
standard
SEND display
Device transmitting but
frequency not according
to standard
Self-check error
4 / 22