FAFREES F20 Mate Manuel D'instructions page 8

normal use, we recommend that a certified, reputable bike mechanic performs all wheel tuning and
truing operations on your bike. Do not attempt to true wheels or tighten spokes unless you have
adequate knowledge, tools, and experience. Ensure the tires and inner tubes are in good working
condition without any visual damage and have the correct amount of air pressure as stated on the tire.
Always replace tires and inner tubes with punctures, cuts, or damage before you ride. Tires without the
correct amount of air pressure can reduce performance, increase tire and component wear, and make
riding your bike unsafe.
Accessories, Straps, and Hardware
Ensure all hardware is secured and all approved accessories are properly attached per the specific
component manufacturer s instructions. It is good practice to look over all hardware, straps, and
accessories before each ride and if you do discover something wrong or something that you are not sure
about, have it checked by a certified, reputable bike mechanic.
Suspension, Handlebar, Grips, and Seat Adjustments
The suspension fork on your ebike will affect the handling of your bike so you must understand how it
works before use. The suspension fork should be properly adjusted according to your weight and terrain.
Ensure the handlebar and handlebar stem are properly aligned, fitted to the user, and secured to their
recommended torque values. Handlebar grips should not move easily on the handlebar end. Loose,
worn, or damaged handlebar grips should be replaced before you ride. The seat and seatpost should be
properly aligned, fitted to the user, and the seatpost quick release should be properly tightened, fully
closed, and secured before riding.
Battery Charged, Secured, and Unplugged
Ensure the battery is adequately charged and operating properly. Ensure the battery charger is
unplugged from the outlet, then stored in a safe location before you ride. The battery MUST be locked
onto the frame battery mount properly before use. Do not operate the electrical system if the battery is
removed.
CHARGER SAFETY INFORMATION
The charger should only be used indoors in a cool, dry, ventilated area, on a flat, stable, hard

surface.
Avoid charger contact with liquids, dirt, debris, or metal objects. DO NOT cover the charger while in

use.
Store and use the charger in a safe place away from children.

Fully charging the battery before each use can help extend the life of the battery and reduces the

chance of over-discharging.
DO NOT charge the battery with any chargers other than the one originally supplied by Fafrees or a

charger designed for use with your specific bike purchased directly from Fafrees.
The charger works on 110/240V standard home AC power outlets and automatically detects and

accounts for incoming voltage. DO NOT open the charger or modify voltage input.
DO NOT yank or pull on the cables of the charger. When unplugging carefully remove both the AC

and DC cables by pulling on the plastic plugs directly, and not on the cables.
EN 5