FAFREES F20 Mate Manuel D'instructions page 14

Step 4: Front wheel installation.
Take out the quick release skewer lever, and loosen the screw from the lever. Place the fork on the front
wheel. Make sure the brake disc is between the brake pads of the brake caliper.
Insert the quick release skewer lever into the front axle core, tighten the screw, then press the quick
release handle to lock the front fork.
Step 5: Pedal installation.
Note the markings on the pedal screws and on the crank arms. Stamp with "L" is the left pedal, stamp
with "R" is the right pedal, the right pedal is installed on the side of the sprocket.
NOTE: The right pedal (pedal with "R" sticker label) is threaded so that it is tightened by turning
clockwise. The left pedal (pedal with "L" sticker label) is reverse-threaded and tightens counterclockwise.
Step 6: Front fender and front light installation.
Loosen the fixing screw on the front fork, fix the front fender fixing hook and the headlight bracket
together with the screw, tighten the screw with a hex key. Then tighten the screws of the fender support.
Step 7: Plug in the display cable to connect power
EN 11