FAFREES F20 Mate Manuel D'instructions page 7

NOTICE: If you do not have the experience, skill, and tools to complete assembly and fit, we highly
recommend having a certified, reputable bike mechanic complete these procedures as well as any future
adjustments or tuning.
NOTICE: A critical aspect of assembling your bike is securing the front wheel and checking the tightness
of the rear wheel axle nuts. These mounting mechanisms may become loose or unsecured during
shipment or over time. The torque and security of all wheel mounting hardware should be inspected
upon arrival and on a regular basis. Both wheels need to be properly secured before operating your bike.
Mandatory Equipment and Use Locations
Before riding, ensure you have all required and recommended safety equipment and are following all
laws pertaining to use an electric bike in your region. For example, these laws may specify the need for
mandatory equipment, use of hand signals, and where you can ride.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of your ebike, void your
warranty and, in some cases, cause your ebike to not conform with laws pertaining to your bike.
The replacement of original components or installation of third-party accessories or
accessories not from Fafrees explicitly recommended for your bike model is at your
own risk. Using aftermarket accessories or components that have not been tested by
Fafrees for safety and compatibility may void your warranty, create an unsafe riding
condition, damage property or your bike, or result in serious injury or death.
Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to having regular maintenance
performed. If you are unsure of how to conduct a complete check of the condition of your bike before
every ride, you should consult a certified, reputable bike mechanic for assistance.
Electrical System
The electric system powers several components on your ebike. It is critical that you familiarize yourself
with all aspects of your ebike's electrical system and check to see if it is working correctly before every
ride. The front and rear brake levers contain safety power cutoff switches, which disable the hub motor's
assistance when applied. Both levers should be checked for correct operation. If the brake lever cutoff
switches, pedal assistance, or lighting functions abnormally, intermittently, or not working, please
discontinue the use of your ebike immediately and contact the Fafrees Support team for assistance.
Brakes
Ensure that the brakes and their system components are free from damage, properly secured and
working correctly. When fully squeezed, both front and rear brake levers should not be touching the
handlebar. Take your bike to a certified, reputable bike mechanic to have the brakes repaired if you find
a problem.
Tires and Wheels
Your wheels should always spin straight and must be repaired or replaced if they wobble side to side or
up and down when spinning. If your wheels become untrue or spokes loosen, which can happen with
EN 4