Pioneer BDR-X13U-S Manuel De L'utilisateur page 20

Connection
Forcefully ejecting the disc
In the following situation, you can forcefully
eject the disc by using the forced ejection
hole.
• When the device has malfunctioned and
the disc cannot be ejected using the eject
button or through the software
1 Check that the computer power is
turned off, and that the disc has
stopped rotating.
2 Straighten a paper clip or similar
object, and insert this straight
into the forced ejection hole and
push hard.
3 The disc tray will come out by
5 mm (3/16 in.) to 10 mm (25/64 in.),
so pull out the tray and remove
the disc.
20
BDR-X13U-S En
Note
• Never forcefully eject the tray while
the disc is still rotating, as doing so
may lead to injury or damage to the
disc.
• Do not place items within 12 cm (4-
23/32 in.) of the front of the device, as
doing so may obstruct disc ejection.