Connecting the USB cable
This unit can be added without shutting down or rebooting the computer. Connect the
unit to the supplied USB cable.
1 Confirm that your computer (PC) has available USB port.
2 With your Windows
USB cable to connect this unit to the PC.
Caution
• Do not disconnect the USB cable during data transfers.
• Do not disconnect the USB cable during the PC start nor any operation with the unit.
(USB 3.0 or higher is
recommended)
Note
• It is recommended to connect to USB 3.0 port or above, , since when a USB 3.0
cable is connected to a USB 2.0 port, the connection will be limited to USB 2.0
performance standards.
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB HUB or using unspecified cables may not
guarantee proper operation.
• The unit will not run on power supplied from the USB connector (bus power). Be
sure to use the unit with the AC adapter supplied with the unit connected.
®
®
or Mac
operating system running, use the supplied
USB Type-A
USB cable (accessory)
Connection
USB Type-B
BDR-X13U-S
19
En