Fitting The Whispa - Myson WHISPA III 5000 Manuel D'installation, D'utilisation Et D'entretien

31601 Whispa Manual - US+French.qxp 16/11/2017 12:01 Page 7
®
06 WHISPA III 5000, 7000 & 9000
8.0 Fitting the WHISPA III
l Position the WHISPA III
location, with the front edge just behind the line of the plinth.
l Ensure that the flexible hoses are not kinked and that the
electrical cord is not in contact with hot surfaces.
Fig. 5
l Align the grille and secure it to the unit with two screws
supplied (use the shorter screws).
Fig. 6
®
®
under the cupboard in the required
Top view of unit
5
/ inch projection
16
Grille securing screws
Unit securing screws
l Replace the plinth and bring the WHISPA III
opening so the front edge projects
plinth.
l Secure the unit/grille to the plinth with two screws supplied
(use the longer screws).
Front view of unit
EN
®
forward into the
5
/ inch through the
16