Water Connection - Myson WHISPA III 5000 Manuel D'installation, D'utilisation Et D'entretien

31601 Whispa Manual - US+French.qxp 16/11/2017 12:01 Page 6
EN

7.0 Water Connection

For ease of installation and maintenance WHISPA III
Flexible hoses are supplied only with the WHISPA III
Pipework must be positioned correctly to ensure flexible hoses are not kinked when installed. See Fig. 2.
12"
Fig. 2a Left hand view - suggestion only
l Connect valve ends of the flexible pipes to the WHISPA III
Note: The direction of the arrows on the EZ flexible hosevalves
are not significant in this application.
l Open valves fully, check pipe connections for leaks and vent
the heat exchanger. A vent screw is provided to vent the heat
exchanger.
Air vent screw
Fig. 4
®
units should be installed with flexible hoses, with integral isolating valves.
®
EZ units.
WALL
16"
WHISPA III
Fig. 2b Right hand view - suggestion only
®
.
Flexible pipes
Isolating valves
Fig. 3
®
5000, 7000 & 9000 05
WALL
10"
4"