Elica EFS130S1 Instructions D'installation page 4

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed (all models)
■ Drill
■ 1.18" (3.0 cm) drill bit
■ .11" (3.0 mm) drill bit for pilot holes
■ Pencil
■ Wire stripper or utility knife
■ Tape measure or ruler
■ Caulking gun and weatherproof caulking compound
■ Flat-blade screwdriver
■ Phillips screwdriver
Models EFS130S1 (ducted or non ducted
(recirculation) installation)
Parts Supplied
■ 2 - 3.5 x 9.5 mm screws.
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular vent connector.
■ Rectangular Carbon Filter. Accessories part No. TM02DC
WARNING
When used in recirculation mode, to reduce the risk of fire and
electric shock use only conversion kit model TM02DC.
Parts Needed
■ Wall or roof cap to match vent system
■ 1 - 75W max, 120V incandescent light bulb.
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular metal vent system
■ 3.2" (8.3 cm) rectangular damper No return valve (optional)
Accessories part No. EXXNRVRT
Models ERS230 (ducted or non ducted
(recirculation) installation)
Parts Supplied
■ 2 - 3.5 x 9.5 mm screws
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular vent connector
Parts Needed
■ 2 - 40W max, 120V incandescent light bulb
■ Wall or roof cap to match vent system
For 7" (17.8 cm) round vented installations:
■ 7" (17.8 cm) round metal vent system
■ 7" (17.8 cm) round vent mounting plate.
Accessories part. No. EXXTRK07
■ 7" (17.8 cm) round damper non return valve (optional).
Accessories part No. EXXNRVRD
Tools and Parts
■ Saber or keyhole saw
■ Metal snips
■ Compass or 8" (20.3 cm) circle template
Parts Supplied (all models)
■ 4 - 3.5 x 9.5 mm mounting screws
Parts Needed (all models)
■ 3 - UL listed wire connectors
■ Vent clamps
For cabinets with recessed bottoms:
■ Two 2" (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
■ Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
Accessories
For 3.2" x 10" (8.3 x 25.4cm) rectangular vented installations:
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular metal vent system
■ 3.2" (8.3 x 25.4 cm) rectangular damper No return valve.
(optional). Accessories part No. EXXNRVRT
For non-vented (recirculation) installations:
Recirculation kit. Accessories part No. ERSRCK30
Models ESN130S1 (non ducted [recirculation] installation)
Parts Needed
■ 1 - 75W max, 120V incandescent light bulb.
Models ENM230 / ENM236 (ducted or non ducted
[recirculation] installation)
Parts Supplied
■ 2 - 3.5 x 5 mm screws
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular vent connector with
damper non return valve
Parts Needed
■ 2 - 50W max, 120V halogen lamps
■ Wall or roof cap to match vent system
For 7" (17.8 cm) round vented installations:
■ 7" (17.8 cm) round metal vent system
■ 7" (17.8 cm) round vent mounting plate.
Accessories part. No. EXXTRK07
■ 7" (17.8 cm) round damper non return valve (optional).
Accessories part No.EXXNRVRD
For 3.2" x 10" (8.3 x 25.4cm) rectangular vented installations:
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
■ Recirculation kit. ENM230 / ENM236: Accessories part No.
ENMRCK36
4