Publicité
1. Rubber cap
2. Locknut
1. Bouchon en caoutchouc
2. Contre-écrou
3. Boulon de réglage
1. Tapa de goma
2. Contratuerca
q w
e
3. Adjusting bolt
3. Perno de ajuste
EBU00872
Clutch adjustment
1. Remove the rubber cap.
2. Loosen the locknut.
3. Slowly turn the adjusting bolt clockwise
until resistance is felt. Then turn it 1/8
counterclockwise.
4. Tighten the locknut to the specified torque.
Tightening torque:
8 Nm (0.8 m0kgf)
NOTE:
Turn the adjusting bolt clockwise to decrease
the clutch free play and turn it counterclockwise
to increase the free play.
5. Install the rubber cap securely.
8-51
Publicité
