Annovi Reverberi RK 11.14 N Notice D'utilisation Et Installation page 27

Declaration of incorporation
The illustration shows a copy of the declaration of incorporation, the original of which is issued by the
manufacturer together with this manual.
HIGH PRESSURE PUMP
SERIAL NUMBER: XXXX
YEAR OF CONSTRUCTION:XXXX
complies with the following applied essential requirements: (1.3.1 - 1.3.2 -1.3.3 - 1.3.4 -
1.3.5 -1.3.6 - 1.3.7)
Conforms to Community Directives: EN 60335-2-79 EN809
The relevant technical documentation has been compiled in compliance with annex VIIB
and we hereby undertake to transmit, in response to a reasoned request by the national
authorities, relevant information on the partly completed machinery.
The putting into service of the aforesaid partly completed machinery until the final
machinery into which it is to be incorporated has been declared in conformity with the
provisions of Directive 2006/42/EC.
The person authorised to compile the relevant technical documentation:
Stefano Reverberi, c/o Annovi Reverberi S.p.a. via Martin L. King, 3
English
TECHNICAL INFORMATION
DECLARATION OF INCORPORATION
(Ann. IIB. DIR. 2006/42/EC)
THE MANUFACTURER
ANNOVI REVERBERI S.p.A
Via Martin L. King,3 41122 Modena (ITALY)
DECLARES THAT THE PARTLY COMPLETED MACHINERY
Modena
07/04/2010
FORBIDS
The Manufacturer
Stefano Reverberi
Managing Director
27
2
Use and Installation