Bosch GLL3-330C Consignes De Fonctionnement/Sécurité page 8

Magnets
Keep the tool, positioning device
BM 1 24, laser receiver LR 6/LR8
25, and laser target plate 26 away
from implants or other medical devices such
as pacemaker or insulin pumps. The magnets
generate a field that can impair the function of
implants or medical devices, which may lead to
serious personal injury.
Keep the tool, positioning device BM 1
24, laser receiver LR 6/LR8 25, and laser
target plate 26 away from magnetic data
storage medium and magnetically sensitive
equipment. The effect of the magnets can lead
to irreversible data loss.
Noise Information
The A-weighted sound pressure level of the
audio signal at one meter distance is 80dB(A).
Do not hold the laser tool close to your ear!
Use and care
Use the correct tool for your application.
The correct tool will do the job better
and safer.
Do not use the tool if the switch does not
turn it on and off. Any tool that cannot be
controlled with the switch is dangerous and must
be repaired.
Store idle tool out of the reach of children and
do not allow persons unfamiliar with the tool
or these instructions to operate the tool. Tools
are dangerous in the hands of untrained users.
Maintain tools. Check for misalignment or
binding of moving parts, breakage of parts
and any other condition that may affect the
operation. If damaged, tool repaired before
use. Many accidents are caused by poorly
maintained tools.
Use the tool, accessories, etc., in accordance
with these instructions and in the manner
intended for the particular type of tool, taking
into account the working conditions and
the work to be performed. Use of the tool for
operations different from those intended could
result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
SAVE THESE INSTRUCTIONS.
Use laser tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, EXPLOSION or risk of injury.
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 265 °F (130 °C) may cause
explosion.
Follow all charging instructions and do
not charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
Disconnect the battery pack from the tool
before making any adjustments, changing
accessories, or storing the tool. Such
preventive safety measures reduce the risk of
starting the tool accidentally.
Do not modify or attempt to repair the tool or
the battery pack except as indicated in the
instructions for use and care.
Have your tool serviced by a qualified repair
person using only identical replacement
parts. This will ensure that the safety of the tool
is maintained.
Develop a periodic maintenance schedule
for tool. When cleaning a tool be careful not
to disassemble any portion of the tool since
internal wires may be misplaced or pinched or
may be improperly mounted. Certain cleaning
agents such as gasoline, carbon tetrachloride,
ammonia, etc. may damage plastic parts.
-8-
Service