probst RG-20/80 Instructions D'emploi page 32

UKCA-Declaration of Conformity / AS-Safeguarding of machinery
1 UKCA-Declaration of Conformity / AS-Safeguarding of machinery
Description:
Type:
Order number:
Importer (United Kingdom): Probst Ltd
Importer (Australia):
The object of the declaration described above is in conformity with the relevant UK- and AS regulations:
UK regulation:
AS regulation:
The following regulations and technical specifications were used:
UK regulation:
AS regulation
Safety of machinery - safety distances to prevent hazard zones being reached by upper and lower limbs.
UK-Regulation:
AS-Regulation:
We herewith confirm that the respective working load limit of our devices is corresponding to the required safety
requirements of DIN EN 13155; UK regulation BS EN 13155; AS regulation AS 4991:2004.
Authorized person for UK documentation:
Name: Nigel Hughes
Address: Probst Ltd ; Unit 2 Fletcher House; Stafford Park 17; Telford Shropshire TF3 3DG, United Kingdom
Signature, information to the subscriber:
Authorized person for AS documentation:
Name: Will Freeman
Address: Probst Australia Pty Ltd; Unit 32/1470 Ferntree Gully Road; Knoxfield VIC 3180, Australia
Erdmannhausen, 09.08.2024..........................................................................
54500002
Round Grab RG
RG-20/80
54500002
Unit 2 Fletcher House
Stafford Park 17
Telford Shropshire TF3 3DG, United Kingdom
www.probst-handling.co.uk
sales@probst-handling.co.uk
Probst Australia Pty Ltd
Unit 32/1470 Ferntree Gully Road
Knoxfield VIC 3180, Australia
sales@probst-handling.au
www.probst-handling.com
Supply of Machinery (Safety) Regulations 2008 (SI 2008 No. 1597)
Safeguarding of Machinery AS 4024.1
BS EN ISO 12100-1:2003+A1:2009
AS ISO 31000 / AS 4024.1
BS EN ISO 13857:2019
AS 4024.1
(Eric Wilhelm, Managing Director)
4 / 21 GB