Spindle Speed Setting/Changing; Tool Height Setting; Fence And Fence Plate Setting - Metabo TF 100 M Instructions De Service

13.3 Spindle Speed Setting/Changing

Remove the plastic cover to have
access.

13.4 Tool Height Setting

If the tool is only partially used and
needs to be lowered below the table,
remove the table rings before moun-
ting it on the spindle.
Caution!
Switch machine off and let tool come to a complete stop before making any adjustments.

13.5 Fence And Fence Plate Setting

A
Loosen both starknobs (A) to move
the fence forward or backwards.
Loosen the ratchet lever and place
belt on the desired step of the pulleys.
Available speeds are:
top
centre
lower
Spindle vertical adjustment is
achieved by turning the handwheel
inside the main frame. Turn
- clockwise to raise
- counter-clockwise to lower
A
B
Loosen the starknobs (B) to reposi-
tion the fence plates.
-1
= 4000 min
-1
= 6000 min
-1
= 7500 min
B
Tighten the belt and replace the plas-
tic guard.
After a spindle height adjustment lock
in position by engaging the spindle
lock lever.
Caution!
Switch machine off and let tool come
to a complete stop before making any
adjustments.