Publicité
Les langues disponibles
Les langues disponibles
INSTALLING THE WATER LINE
Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
Use Copper Tubing
•
¼" copper tubing
•
¼" compression nut (1pc)
•
Ferrule (2pc)
1. Connect the household water line to the assembled compression fitting.
- If you are using copper tubing, slip the compression nut
copper tubing (not supplied) as shown.
- If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing .
CAUTION
3. Tighten the compression nut
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug,
leak-free connection.
Installing the water filter.
After remove the right side upper shelf, you can install the
water filter more easily.
1. Remove the water filter cover (
2. Remove the fixed cap (
the cap in a safe place for later use if you don't use the filter.
3. Remove the water filter (
replacement indicator sticker (Indicator sticker is included in
the box) on the filter as shown. Place the sticker on the filter
that dates six months in the future. For example, if you install
the water filter in March, put the "SEP" sticker on the filter
to remind you to replace it in September. This way, you can
remember the time to replace the water filter. Normally, a filter
life is about 6 months.
DA68-01827C-16.indb 19
Use Plastic Tubing
•
¼" plastic tubing
→
Molded end(Bulb)
•
¼" compression nut (1pc)
onto the compression fitting. Do not over-tighten the compression nut .
)
1
) by turning it counter clockwise. Keep
2
) from the box and put a
3
Refrigerator
Compression
Nut (1/4")
(Assembled)
Ferrule
(Not supplied)
Copper tubing
Plastic tubing
or
(Not supplied)
(Not supplied)
Household water supply line
(not supplied) and ferrule (not supplied) on
2
Plastic Tubing
(Assembled)
Compression Fitting
(Assembled)
Molded end(Bulb)
Compression nut
(1/4") (Not supplied)
1
3
Indicator sticker
(month indicator)
Setting Up _19
2013. 12. 10.
5:00
Publicité
