Publicité
Les langues disponibles
Les langues disponibles
TRANSPORTATION AND CHANGING OF
PART - 5.
INSTALLATION POSITION
Transportation and changing of Installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the in-
stallation position, all the moving objects
(ie,shelves,crisper...) should be taken out
or fixed with bands in order to prevent them
from getting damaged.
Repositioning the door
• It is not possible to change the opening direction of your refrigerator door, if the door
handle on your refrigerator is installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your refrigerator may be changed, you should contact the
nearest Authorised Service Agent to have the opening direction changed.
BEFORE CALLING YOU'RE AFTER SALES
PART - 6.
SERVICE
What to do if your refrigerator does not operate
Check that:
• There is no power,
• The general switch in your home is disconnected,
• The thermostat setting is on the « »position,
• The socket is not faulty. To check this, plug in another appliance that you know is working
into the same socket.
What to do if your refrigerator performs poorly
Check that:
• You have not overloaded the appliance,
• The doors are closed properly,
• There is no dust on the condenser,
• There is enough space at the rear and side walls.
If there is noise:
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling
sound) even when the compressor is not running. Do not worry this is quite normal. If you
hear any other sounds, check that:
• The appliance is level,
• Nothing is touching the rear of the appliance,
• The objects on the appliance are vibrating.
EN -15-
Publicité
