Using the Timer
26
3^00-11:00^)
Cp00-2.00PjyP)
k
©^>©
p
REC TIMER
Not activated
7
Using the Sleep Timer
The unit off time can be set up to two hours ahead of the
present time.
Press [SLEEP] to select the desired time.
f—*30—>60—»90—► 120-1
1-SLEEP
OFF*-1
(The display changes each time the button is pressed.)
The unit is turned off after the set time has elapsed.
To release the timer function:
Press [SLEEP] to select "SLEEP OFF".
To check the time remaining during operation:
Press [SLEEP],
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then [SLEEP] to select
the desired time.
Using the sleep and play timers in
combination
Example: Falling asleep listening to FM programming and wak¬
ing up the next morning listening to a CD. □
1. Program the play timer for CD play (~ page 23).
2. Select the desired radio station and set the sleep timer.
Play starts at the set volume even if it was reduced after setting
the timer.
•When programmed times overlap
E
When play is programmed to begin before the sleep timer turns the
unit off, the play timer is not activated. The unit turns off after the
programmed sleep timer is completed. Always set the sleep timer
so that the unit turns off by the time the play timer is programmed
to begin.
Using the sleep and recording timers in
combination
Example: Falling asleep listening to a cassette and recording
FM programming during the night E
1. Program the recording timer to record the FM programming and
insert recording cassette into deck 2 (■* page 24).
2. insert the playback cassette into deck 1 and set the sleep timer.
•When programmed times overlap 0
When recording is programmed to begin before the sleep timer
turns the unit off, the recording timer is not activated. The unit turns
off after the programmed sleep timer is completed. Always set the
Sleep timer so that the unit turns off by the time the recording timer
is programmed to begin.
Note
The play and recording timers cannot be used together.
RQT4598