SilverCrest SWKE 3100 A1 Mode D'emploi page 23

11. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
No function
• Check the connection.
Device does • Is the lid 10 of the ket-
not switch off
the boiling pro-
cess
Possible causes /
Action
connected to the pow-
er supply?
tle 2 closed?
12. Technical
specifications
Model: SWKE 3100 A1
Mains voltage: 230 – 240 V ~ 50 - 60 Hz
Protection
class: I
Power rating: 2.850 – 3.100 W
Filling volume: 500 – 1,700 ml
Symbols used
Geprüfte Sicherheit (certified
safety): devices must comply with
the generally acknowledged
rules of technology and the Ger-
man Product Safety Act (Produkt-
sicherheitsgesetz - ProdSG).
(Not for UK)
With the CE marking,
HOYER Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials are marked
with the recycling symbol (3 ar-
rows). The material can be speci-
fied by the recycling number in
the centre (here: 21) and/or an
abbreviation (here: PAP).
AC voltage
It is a recyclable product which is
subject to an extended producer
responsibility and for which the
rules of waste separation apply.
Subject to technical modifications.
21
GB