3. Getting started - Connecting Devices
How does it work?
When a user tries to access the Camera, our secure server authenticates the
user's identity and permits access to the Camera.
3.1
Setup
Connect the Camera to the power adapter, then plug into an suitable mains
power socket and make sure the power switch is in the ON position. The
Camera must be within range of the Wi-Fi
connect it to. Make sure the password of the router is available for entering
during the in-app setup process.
Status of LED Indication:
- Pair / Setup state:
- Unconnected state:
- Connected state:
- Ready for connection state: LED is Blue and flashing slowly
Note: You can only setup via a compatible smartphone or tablet and not via a PC.
10
Access your
Camera locally
LED is Red and blue and flashing slowly
LED is Red and flashing slowly
LED is Blue and always on
View your Camera from any
compatible device remotely
®
router with which you want to
Getting started - Connecting Devices