Publicité
Les langues disponibles
Les langues disponibles
2)
INSTALLING YOUR APPLIANCE
a)
Before I nstallation
Caution:
Check that your machine has not been damaged during transport (door or seals distorted,
etc.).
If you note any damage whatsoever before use, do not install the oven if it is damaged and
contact your retailer.
Remove the packaging and put the accessories aside.
Control Panel: Remove the protective film from the surface of the control panel.
Do not remove the light brown Mica coating which is found in the cavity of the oven
and which protects the magnetron.
b)
I nstallation
1. This product must not be built in.
Leave at least 30 cm of free space above the oven and 20 cm at the sides (Fig 1).
Do not take the feet off the oven.
Do not obstruct the air vents as you risk early damage to your machine.
Fig. 1
c)
Electrical Connection
• It is essential to use a socket with an earthing terminal connected in compliance with the
safety standards in force.
• In your electrical installation provide a user-accessible device which must be able to separate
the machine from the mains, the contact opening of which is at least 3 mm on all poles.
• If the power cable is damaged it must be replaced by the manufacturer, its after-sales service
or any other similarly qualified person to avoid any danger.
36
Publicité
