Eneo GLC-1701/IR Instructions D'installation Et D'utilisation page 15

4.2 Internal
GLC-1701/IR
a
b
c
d
(a) Lens hood
(b) Focus adjustment knob
(c) Zoom adjustment knob
(d) Iris level adjustment potentiometer
(e) Infrared LED
(f) IR LED board ASS'Y
(g) Function switch
(h) Power supply board
(i) Ethernet server module
Switch Description – GLC-1701/IR
SW Name ON (down)
2
ELC/ALC ELC: Elec. shutter mode
3
BLC Back light compensation ON
5
FL Flickerless ON
Shutter is fixed to /0sec.
7
Day-Night IR cut filter OUT (automatic)
*): Flickerless mode is useful in areas where AC mains is 50Hz and TV system is NTSC such like Japan
or AC is 60Hz and TV system is PAL to reduce the flicker under the florescent lights.
When FL is set to ON, the low light sensitivity is down about 30%.
e
f
g
h
i
5
GLC-1702
a
b
c
(a) Focus adjustment knob
(b) Zoom adjustment knob
(c) Iris level adjustment potentiometer
(d) Function switch
(e) Power supply board
(f) Ethernet server module
OFF (up)
ALC: Auto iris lens mode
Back light compensation OFF
Flickerless OFF
(at 50Hz mains frequency)
IR cut filter ON (for colour operation)
d
e
f
Rem..
*)