Publicité
Les langues disponibles
Les langues disponibles
5 ASSEMBLY
5.1
8
Assembly
Info
All screws, bushings, springs and nuts from the original part hand brake lever are re-used. These parts
must be cleaned thoroughly and greased (if necessary) before assembly.
502368-01
502369-01
–
2
Remove screw
and original hand brake lever.
–
Position hand brake lever
2
ten screw
.
Guideline
Screw, hand brake
lever
Info
Ensure that the hand brake lever is correctly moun-
ted. Before the first use, make sure to check that the
brake works properly. The desired pressure point can be
adjusted using the adjusting wheel.
1
(included) and mount and tigh-
8 Nm (5.9 lbf ft)
Publicité
